Show and Tell from the June Meeting

Steve Dodd’s CNC Box

The June club meeting was well attended, despite the cold but sunny weather!

The highlight of the meeting was a presentation by Bob Aitken and Terry Hulm on the use of resins in their work. Unfortunately, I had to leave early, and missed a very slick and informative presentation – regretfully, we have no photos!

A diverse range of pieces were put up for ‘Show and Tell’. Steve Dodd and Alan Bishop shared the draw for vouchers.

Steve Clarke’s Cigar Box Guitar
Colin Lang’s Puzzle piece. Unfortunately, Colin dropped the puzzle, and couldn’t get it back together!
A Bandsawn Box by Darby Munro – made from a piece of the legendary ‘Mongrel Mango’.
A Plectrum Holder – built by Steve Dodd for his daughter to hold guitar picks. CNC machined.
A mallet – made by Colin Lang’s grandson.
Paper Napkin Holder – made by Steve Dodd while learning to use his CNC machine.

4 thoughts on “Show and Tell from the June Meeting”

  1. Hi my name is Max Tutt 0429412250 max.tutt@bigpond.com recently I visited the Coldstream Gallery and they had a hair oak vase I was wondering who made it as I would love to have a chat to the guy do a little wood turning and hand caving out of basically firewood (recycled) wood. Regards. Max Tutt. Byron Bay

    Like

    Reply

  2. Hi my name is Max Tutt 0429412250 max.tutt@bigpond.com recently I visited the Coldstream Gallery and they had a hair oak vase I was wondering who made it as I would love to have a chat to the guy do a little wood turning and hand caving out of basically firewood (recycled) wood. Regards. Max Tutt. Byron Bay

    Like

    Reply

      1. The gallery suggested I make contact with u people for the information I was really interested in the finish work etc. thanking you. All best for festivity’s

        Sent from my iPhone

        >

        Like

Leave a reply to Max tutt Cancel reply